Programmable Dual Drive EYESC Electronic Speed Controller based on the VESC 6.1 project, designed for dual-motor electric skateboard builds. It is completely customisable using the VESC tool.

.Color: As Shown
.Material: PCB + Metal
.Drive: Two motors with a dual drive ESC
.ESC Program Version: 6.0
.Latest Firmware: ESC-3.53
.Can be programmed by ESC6 program
.Supported Sensors: Hall
.Selected Hall Voltage: 3.3 or 5
.Mode: DC, BLDC, FOC (sine wave)
.Main PCB: 100mm x 70mm x 25mm
.Connection Cable: 50mm
.Power Cord and XT 60 Plug: 40mm
.Control Interface: Motor line: 50mm
.Power Cord and XT 60 Plug: 40mm
.No CAN bus interface
.USB C port
.Product Weight: 270g
.Package Dimensions: 20 x 20 x 15cm
.Package Weight: 300g
.Packing: Carton Box

Package Content:

.1 x ESC with Case
.1 x Remote Control

Unique Features

• Designed only for Electric Skateboard,
• Receiver build-in PCB
• built-in Switch
• Reverse Capabilities
• Delete many unnecessary parts and ports for drone
• Smaller than similar functional VESC
• Solve the problem of easily burning MOSFETS when instantly braking electric skate

Benefits

• Built-in High Power Switch
• 5 Min Smart Auto power down
• AluminiumSheet heatsink
• Regenerative braking charges battery
• Sensored & Sensor-less Motor Control
• Robust USB C interface

Control Interface

• Motor Wires: 50mm
• Power Wire & XT 60 Plug: 40mm
• No CAN bus interface
• USB C Port

Advanced Features

• Over Voltage protection
• Over Current Protection
• Current and voltage monitoring on all phases
• Field Oriented Control
• Rapid duty cycle changes
• Soft back off for over current & over temp

Software Features

• Advanced configuration suite
• Adjustable Motor & Battery Current Limits
• Low & High Voltage limits
• Regenerative Battery Current Control